Beaufort Flush Glazed Bi-fold Technical Page

View/Download

Order / Checklist

Beaufort Sections and Thresholds Identification

Beaufort Thresholds, Floor Levels, Drainage

Beaufort Fitting & Assembly Guide

All of our Bi-folding doors are fully assembled and tested in the factory jigs prior to despatch.

They are photographed up to 28 times to ensure they reach you in perfect working condition.

These photographs are then put into every accessory box that is sent out with every door along with full fitting instructions.

Note: The above would not apply if we are fitting for you, as our experienced fitters know exactly what they are doing.

Beaufort Bi-fold Quality Control

We believe that the best way to make sure that every single one of our Bi-fold doors arrives to you in an excellent working condition, is to check them thoroughly before they leave the factory. Each Bi-fold door therefore that leaves the factory is checked by Quality Control; for more details see our Quality Control page.

Please note that the statistics below apply when using: Double-glazing, argon filled (low-E, en=0.05, soft coat), 16mm or more (1.2 Glass - U Value centre Pane*).

Beaufort Bi-folding Doors Specifying - Suitable Applications

• Can be specified for residential / domestic applications.
• Meets building regulations for new build. (For Oct 2010)
• Meets building regulations for replacement and refurbishment projects. (For Oct 2010)
• Standard fully weather rated threshold; suitable for use up to second floor and exposed locations.
• Flush low threshold options; suitable for use on the ground floor only, not recommended for use in exposed locations or properties situated by the coast.

Beaufort performance

These statistics apply for:
Open out doors, double-glazed units, 90% argon gas filled (4mm Planitherm total +, 3mm Planilux), 16mm or more, Swiss V warm edge spacerbar (1.2 Glass - U Value centre Pane*). Achieving air permeability Class 4, water tightness meets & exceeds requirements for class 9A, wind resistance meets class AE2400. Weather tested in accordance with BS6375 part 1 & 2.

Beaufort Flush-Glazed Bi-fold Sizes

*Please Be Advised: Doors over 2500mm tall maybe subject to a wind loading check. In which case we will need to know the location, postcode and facing of the doors.

Beaufort Flush-Glazed Bi-fold Door Key Profile Dimensions

Beaufort Flush-Glazed Bi-folds Glass Sight-lines

Beaufort Bi-fold Number of Door Panels

Please remember all sizes are for guidance only and are subject to location of the fitted product. Please contact us for more information.